Κατηγορίες Προϊόντων

Audio Developments AD255

Drama & Location Film Handmade Portable Mixer

AD255 is the latest addition to the Audio Developments Ltd range of portable mixers, having comprehensive facilities set out in an ergonomically friendly design and all contained within a robust and rugged aluminium case with a relatively small footprint. 

The features and specification are based on the well established AD245 Pico Mixer. Two auxiliary sends and channel direct outputs are the main additional features. As with the other models within the range, professional components are used throughout - including Penny and Giles 100mm long-stroke, conductive plastics faders. 

Location sound professionals now require multi-track record facilities, the channel direct outputs provide the necessary features; without compromising the simplicity of operation and reliability of its counterpart the AD245.

Features

  • Low Noise Mic Amplifier developed for AD140 series of mixers. Power is provided for 48V Phantom and 12V Tonader microphones
  • A simple but effective 3 Band EQ, proved and approved under field conditions, in use throughout the AD140 series of mixers
  • Inputs are transformer Balanced and protected against radio-frequency interference. A high-pass filter protects against low-frequency saturation.
  • The main stereo output is transformer balanced and have separate master rotary controls. Auxiliary 1 & 2 are routed from each input using a 3 position switch (off, pre and post fader). Auxiliary 2 has a rotary level control 
  • Limiters which may be linked for stereo operation, are incorporated in the main output. Limiting is indicated by a pair of LEDs.
  • Direct outputs are unbalanced and driven from a very low impedance source with high drive capability 
  • Two LCD meters display - either PPM or VU - monitor the main output, auxiliary output and PFL of each input. Useful for monitoring level at a direct output. Battery level and monitor status (Direct or Return) are also indicated. Meters can be illuminated. 
  • Frequency of Internal Oscillator can be selected between 1kHz and 10kHz, it's output replacing the signal on the main output
  • Via an internal mic, the mixer operator is able to communicate with the main output (SLATE) and with an outstanding (EXT). The outstanding normally receives a mono of the mixers main output. 
  • The headphone monitor may be switched between main output, auxiliary and return. All have PFL override. Monitor selectors alllow left, right, left +right, auxiliary 1, auxiliary 2, and auxiliary 1 + 2 to be routed to the headphone socket. An M-S matrix amplifier may be inserted in order to decode main or auxiliary outputs in the M-S domain. 
  • An electronically balanced stereo tape return appears on a pair of stereo jack sockets. An input calibration potentiometer is adjacent to the jack sockets on the connector panel.
  • All input and output connectors are presented on one surface of the case and in line with their corresponding modules. 
  • The mixer receives power from 8 x C cells fitted internally or from an external 12V - 15V DC source. 

TECHNICAL SPECIFICATIONS

  • Reference: 0dB = 775mV at 1kHz unless otherwise stated
  • Max Gain Mic: 80dB 
  • Max Gain Line: 50dB 
  • Max Input Level Mic @ Max Gain: -44dB
  • Max Input Level Mic @ Min Gain: 0dB 
  • Max Input Level Line @ Max Gain: -14dB 
  • Max Input Level Line @ Min Gain: +20dB 
  • Stereo-Return: +18dB 
  • TB Return: +18dB 
  • Input Impedance Mic: > 2k5R 
  • Input Impedance Line: > 6k5R
  • Stereo Return: > 100kR
  • TB Return: > 20kR 
  • Mic Powering: 48V Phantom & 12V Tonader 
  • Max Output: +23dBm L-R, AUX & MONO 
  • (600R load) Transformer Bal
      • +18dBm Direct Out, Headphone & EXT 1
  • (600R load) Unbalanced
  • Output Impedance
    • Frequency 0: -1dB L-R, AUX & Mono & Direct Out
    • Response 0: -1.5dB Monitor Paths
  • Harmonic Distortion
  • Overload Illuminates @ +15dBu at the Pre-Fader Indicator 
  • Crosstalk
  • Intergroup & Interchannel 
  • Noise Mic 
  • Line
  • Equalisation HF: ±10dB @ 10kHz 
  • Equalisation LF: ±10dB @ 100Hz 
  • Equalisation MF: ±15dB
  • Centre Frequency: 2k5Hz Q=1.2
  • HPF: Pre-Transformed 12dB/Octave 
    • -3dB @ 150Hz 
    • -3dB @ 90Hz 
  • Output Limiter Threshold: +8dB
  • Ratio 7 : 1 
  • Attack 2 Settings
    • Internally Switchable
      • 1: 4mS 2: 0.8mS 
  • Release 2 Settings
    • Internally Switchable 
      • 1: 250mS 2: 80mS
  • Factory Setting: Slow
  • Current: 240mA (6 Input) 
  • Consumption: 12V DC Supply
logo footer

KEM Systems Ltd
Με επιφύλαξη παντός δικαιώματος © 2013
κατασκευή ιστοσελίδων | προώθηση ιστοσελίδων: ClickMedia

ΔΕΥΤΕΡΑ / ΠΑΡΑΣΚΕΥΗ 09.30 - 19.00
Κριμαίας 4 , Αμπελόκηποι 11526
210 - 67 48 514
Αυτή η διεύθυνση ηλεκτρονικού ταχυδρομείου προστατεύεται από τους αυτοματισμούς αποστολέων ανεπιθύμητων μηνυμάτων. Χρειάζεται να ενεργοποιήσετε τη JavaScript για να μπορέσετε να τη δείτε.